Polypipe – Multiple Room Overlay Heating Kit

Polypipe™ Water Underfloor Heating Systems are the ideal choice for homeowners and tradesmen looking to install the market leader in water underfloor heating systems.

Polypipe™ Standard Output – water underfloor heating single room kits are ideal for well insulated areas which are to be controlled by one thermostat . Each kit is designed to cover an area in square meters when the pipe is spaced at 200mm apart.

This spacing is suitable for well insulated areas. If you are uncertain that your area is well insulated we recommend our high output systems.

Please Note : Polypipe™ Water Underfloor Heating kits feature water temperature control, beware of systems without this facility. Polypipe™ only use high quality Polybutylene pipe. Visit polypipe.com for more details.

Below are examples of all products which could comprise your Polypipe Water Underfloor Heating Kit. You can find out exactly what you will get in the box using our handy Kit Content Comparison Table below.

Polypipe Water Underfloor Heating Kit Components:

A Rated Grundfos Single Circuit Constant Supply Temperature Unit

New EEI compliant pump
Mixer Valve
Adaptor Kit
Isolation Valves

The Control Pack maintains the water temperature in an underfloor heating system between 35°C and 60°C.

Multi port push fit manifold includes fill & drain valves

The manifold comes complete with a drain and air vent assembly, which can be positioned on either end of the manifold and isolation valves are supplied separately for the supply end of the manifold.

Each Polypipe manifold includes a flow meter on each flow port to provide a visual indicator of the flow through rate of each circuit.

Material: Brass
Outside Diameter: 15mm
Manufactured in accordance with BS EN ISO 9002

Pipe, includes stainless steel pipe stiffeners

Suitable for all plumbing and heating applications as a flexible alternative to copper tube
Suitable in both hard and soft water areas.
Material: Polybutylene
Outside Diameter: 12mm
KIWA/KOMO approved (Certificate numbers K14341, 14342 and 14343)

Thermal Actuators

Underfloor Heating Valve Actuator
The Polyplumb system is suitable for use in hot and cold water supply
The system is suitable for use in working applications up to 12 Bar/20 Degrees Centigrade (6 Bar/90 Degrees Centigrade)
Manufactured in accordance with BS EN ISO 9002

Single zone master control unit & multi zone slave unit

When used in a ‘single zone’ application the master wiring centre (PB1ZM) provides the wiring connections for the under floor heating pump, two-port zone valve, boiler switched live connection (230V or volt free) and the programmable room thermostat.

The multi zone slave unit plugs in to the Single Zone Master Unit (PB1ZM) and provides simple wiring of actuators and room thermostats for multiple zone control.

Please note: Master control and slave units may change depending on the selection of thermostats.

Kit Content Comparison Table

This table shows exactly what you’ll get in the box based on your chosen kit size.