- Size: 505 x 1140mm Width x Height and Size: 480 x 1010mm Width x Height
- Surface : 8mm Glass
- Choice of finish available [Optional]
- Features Dual flush
- Compensation of dimensional tolerances possible
- Front cladding made of glass (ESG)
- Cistern fully insulated against condensation
- Side cladding made of aluminium brushed
- Self-supporting
- Adjustable flush volume
- Soft-touch buttons for flush actuation and odour extraction
- Orientation light and odour extraction activated when a user approaches
- Orientation light can be set in seven colours
- User detection range can be set
- Day/night detection can be set for orientation light
- Odour extraction unit with ceramic honeycomb filter can be installed without tools
- Ceramic honeycomb filter for odour neutralisation can be replaced without tools
- Odour extraction unit automatically switches off after a predefined running time
- Operation with extra-low voltage, no mains voltage in cistern
- Mains connection with flexible three-wire sheathed cable
- Water supply connection on the rear centre
- Water supply connection on the left/right possible with accessories
- Water supply connection on the bottom
- Protection class I
- Protection degree IPX4
- Nominal voltage 100-240 V AC
- Mains frequency 50-60 Hz
- Operating voltage 4.1 V DC
- Power consumption 5 W
- Flow pressure 0.1-10 bar
- Maximum operating temperature, water 25 °C
- Flush volume, factory setting 6 and 3 l
- Flush volume large, adjustment range 4.5 / 6 l
- Flush volume small 3 l
- Calculated flow rate 0.11 l/s
- Minimum flow pressure for calculated flow rate 0.5 bar
- Water supply Side connection Set [Optional]
- Vario Fastening Set [Optional]
- Download Installation manual PDF from below
- Application purposes
- For floor inlets
- For renovations, conversions and new buildings
- For wall inlets with an inlet height of 18 cm
- For replacing floor-standing WCs with concealed cistern with maximum service opening height < 109cm
- For replacing low-level exposed cisterns
- For replacing half-high level exposed cisterns
- For replacing floor-standing WCs with close-coupled exposed cistern
- For connecting Geberit AquaClean Sela floor-standing WC
- For connecting Geberit AquaClean WC enhancement solutions, with accessories
- For replacing pressure flushing valves
- For mounting on finished floors
- For installation in front of dry-walls or solid walls
- Scope of delivery
- Water supply connection set with 2 angle stop valves, 1/2″
- Flush bend extension 160 mm
- Connection bend made of PP, Ø90mm
- Sleeve made of EPDM, Ø44 / 55mm
- Adaptor socket made of PE-HD, Ø90 / 110mm
- Female socket for mains connection
- Power supply unit
- Fastening material
- Base cover
- Fastening material for drywall
Why Choose RSF Bathrooms?
High Quality Products
Highly Rated Reviews
30 Years Experience
Free Delivery
Secure Shopping
30 Days Money Back